Onbon BX-VSM Full color LED Display Synchronous sending card
Onbon BX-VSM sending card supports BX receiving card (BX-V/BX-V75/BX-V75L/BX-V75H)to control full color led video screen;
Parameter:
Technical parameters |
|
Product status |
Launched into market in Sep 2018 |
Control size |
Single card control size ≤1280*1024 @60Hz,2048*1024 @30Hz; max width is 3840,max height is 3840 |
Gray level |
≤65536 grade |
Communication transmission |
|
Receiving device |
Support BX-V series receiving card and BX-VMF |
Communication distance |
The
CAT 5E ≤140M, and the CAT 6≤170M multi-mode transceivers≤550M.( infinite extension should use a repeater) |
Transmission device |
Support Gigabit switches, Gigabit fiber transceivers and Gigabit fiber switches |
Video source input |
|
Video input interface |
DVI VESA standard |
Input resolution |
Support random resolution |
Video source rate |
standard 60Hz,auto adapt rate |
Gigabit network output |
|
Network port |
2 nos of Gigabit network port |
Control size |
Each network control 1280×512@60Hz,
2 nos of network port max control size
1280×1024@60Hz |
Network split |
2 nos of Gigabit output ,support up to down ,left to right joint |
Data tansmit format |
According to Gigabit format ,add CRC checking is additional |
Important function |
|
Parameters setup |
Setup sending card parameters via USB port |
Real time adjust parameters |
Support |
Brightness/color tempature adjust |
Support |
Intelligent detection system |
Support DVI video interface info testing |
Real time clock on board |
Support |
Multi-screen setup function |
Support control different size screen at same time |
Background play |
Support(extension mode) |
Audio transmission |
Support |
Network error monitoring |
Monitor the communication error rate and communication fault diagnosis between sending card and receiving card, receiving card and receiving card |
System update and maintenance |
|
Readback Config file |
Support readback sending card configuration info,support readback sending card firmware version |
Firmware update |
Support firmware and FPGA update online,cost efficient |
Electricity parameters |
|
Working volage |
5V(4V~6V) |
Max power |
≤6W |
Working temperature |
-40℃~80℃ |
Working humidity |
10%RH~90%RH |